China Ceramic UF Membrane Suppliers and Factory for High-Performance Water Purification Solutions
Description
Comparison of Inorganic & Organic Membrane
| Item | Ceramic Membrane | Organic Membrane |
| Service life | Above 5 years | About 2 years |
| Recommended flux (L/㎡·h) | 50~200 | 15~50 |
| Pollution index | Purely natural and pollution-free | Small amount of plastic chemical pollution |
| Chemical stability | Good, resistant to acid and alkali corrosion, resistant to organic solvents | Susceptible to corrosion and dissolution from organic liquids and chemical reagents |
| Biodegradability | Resistant to microbial attack | Easily decomposed and rendered ineffective by microorganisms |
| Clean | Compatible with a variety of chemical cleaning agents, and suitable for high-impact compressed air cleaning | Requires specific chemical cleaning and gentle physical cleaning |
| Mechanical strength | High mechanical strength, adaptable to various operating environments such as high pressure, positive pressure, or negative pressure | Relatively low intensity |
| Save method | Simple, dry storage, prevent impact | Strict requirements exist for storage temperature and relative humidity; measures must be taken to prevent membrane hydrolysis, microbial growth, shrinkage, and deformation |
Design of Water Purification Plant
Process Overview
High-level drinking water source → Chemical dosing and flocculation → High-level sedimentation and filtration tower → Self-cleaning filter → Ceramic ultrafiltration membrane module → Disinfection → Water storage tank → External pump → User
Composition of Ceramic UF Membrane Module
Membrane Module Dimensions
| NO. | Overall Dimensions (mm) (L×W×H) | Water Inlet (mm) | Water Outlet (mm) | Concentrate Outlet (mm) | Wastewater Outlet (mm) | Membrane Area (m²) | Number of Water Membranes (pcs) | Production (m³/d) |
| 01 | 4000×1500×2700 | DN125 | DN100 | DN80 | DN150 | 328/392 | 16 | 1000 |
| 02 | 6000×1500×2700 | DN150 | DN125 | DN100 | DN200 | 574/686 | 28 | 2000 |
| 03 | 5000×2300×2700 | DN200 | DN150 | DN100 | DN200 | 902/1078 | 44 | 3000 |
| 04 | 6000×2300×2700 | DN200 | DN200 | DN125 | DN250 | 1148/1372 | 56 | 4000 |
| 05 | 7200×2300×2700 | DN250 | DN200 | DN150 | DN300 | 1476/1764 | 72 | 5000 |
Frequently Asked Questions (FAQ)
Ceramic membranes are made of inorganic Al₂O₃, which provides superior mechanical strength, resistance to chemical corrosion, and protection against fiber breakage or microbial degradation. Unlike organic membranes (PVDF, PES, PVC), they do not release micropollutants or deteriorate when exposed to harsh chemicals.
Ceramic ultrafiltration membranes offer a working service life of over 5 years under recommended operating conditions, significantly outlasting organic membranes, which typically require replacement after approximately 2 years.
The ceramic UF membrane features a precision pore size ranging between 0.01 and 0.02 micrometers (10 to 20 nanometers), enabling near-complete physical separation of viruses, bacteria, colloids, and suspended solids.
Due to their high chemical stability and mechanical resilience, ceramic membranes can be cleaned using a variety of aggressive chemical cleaning agents, strong acids, strong alkalis, and high-impact physical cleaning with compressed air.
Unlike organic membranes that demand strict humidity control and preservation solutions to prevent drying and microbial growth, ceramic membranes only require simple dry storage while safeguarding against mechanical impact.
Ceramic membrane modules are extensively applied in municipal drinking water purification plants, industrial wastewater recycling, food & beverage processing, and chemical fluid separation where high operating fluxes and chemical resistance are mandatory.